일반산업

국내외 태양광 시장 및 업체 현황

2009-08-05안혜영

목차
■ 태양광 산업의 고성장세의 영향으로 태양전지 시장도 연평균 40% 이상의 고성장 지속 ● 태양광 산업의 성장에 따라 핵심기술인 태양전지 산업도 크게 성장하여 2000년대 이후 연평균 40% 이상의 고성장세를 지속함 ● 태양전지는 크게 결정질 실리콘(Crystalline-Si) 태양전지와 박막형(Thin Film) 태양전지고 구분되고 있음. 그동안 안정성과 높은 효율성의 장점을 내세워 결정질 실리콘 태양전지가 전세계 생산량의 90% 이상을 차지해옴 ● 그러나 최근 원재료인 실리콘 공급 부족으로 인해 박막형 태양전지의 수요는 급격히 증가하고 있음. 박막형 태양전지의 생산능력은 2010년 까지 연평균 약 120%의 고성장이 예상됨 ■ 태양전지 시장은 현재 일본, 유럽, 미국이 주도 ● 태양전지 시장은 일본, 유럽, 미국이 전세계 생산량의 90%에 달하며 시장을 주도함. 반면 국내 태양 전지 시장의 비중은 약 1%에 불과한 상황 ● 국내 태양전지 산업의 기술은 선진국 대비 70% 수준. 결정질 실리콘 태양전지의 경우 비교적 기술수준이 선진국에 근접해 있으나, 박막형 태양 전지의 기술 수준은 매우 취약한 것으로 평가됨 ■ 박막형 태양전지 부문에서 선진 업체와의 기술 협력이 요구됨 ● 박막형 태양전지는 효율성이 쉽게 개선되지 않으며, 상업화 기간이 길지 않아 결정질 실리콘 태양전지 대비 수명과 신뢰성에 대한 검증이 이루어지지 않음 ● 이에 따라 국내 태양전지 업체들이 박막형 태양전지 시장에 진입하기 위해서는 내부 연구개발을 통한 직접적인 진출보다는 선진 업체들의 기술 도입을 통한 진입이 필요한 상황임 ● 박막형 태양전지 부문에서 오랜 연구 경험을 가지고 이미 상용화 진행되고 있는 미국 및 독일의 태양전지 업체와의 기술 협력이 가장 효과적인 것으로 분석됨 ● a-Si 박막형 태양전지의 경우, 국내 업체가 초기 생산 기술력을 보유하고 있으므로, 선진업체와의 기술제휴를 통해 상용화 기간을 단축할 수 있을 것으로 예상됨 ● 화합물의 박막형( CdTe, CIGS ) 태양전지의 경우, 선진업체와의 기술 격차가 매우 크므로, 기술력과 상용화 능력을 갖춘 업체와의 M&A를 통해 시장에 진입하는 것이 효율적일 것으로 판단됨
요약
■ The solar cell market has continued to grow over 40% per year on average on the back of rapid growth in the solar energy industry ● The solar cell industry, which is the core of the solar energy industry, has continued to post average annual growth of over 40% since 2000. ● Solar cells can be broadly classified as Crystalline-Si and Thin Film cells. Crystalline-Si cells are comparatively safe and efficient, and thus account for over 90% of global solar cell production. ● However, recent shortages in silicon, which is a key raw material for solar cells, have led to sharply rising demand for Thin Film cells. Production capacity for Thin Film cells is expected to grow rapidly at about 120% per year until 2010. ■ The solar cell market is dominated by Japan, Europe, and the U.S. ● Japan, Europe, and the U.S. dominate the solar cell market and account for 90% of global production. Korea accounts for roughly 1% of the total market. ● Domestic solar cell technology is about 70% that of developed nations. Crystalline-Si technology is at a similar level to developed countries, but Thin Film technology is much less advanced. ■ Technological collaboration with advanced companies in the Thin Film sector is needed ● The efficiency of Thin Film cells is difficult to improve, and due to their relatively recent commercialization, their lifespan and reliability have yet to be tested against that of Crystalline-Si cells. ● As a result, in order to successfully enter the Thin Film cell market, domestic solar cell companies should aim to adopt technology from more advanced companies rather than pursuing in-house research and development. ● Collaboration on technology with U.S. or German firms that have already commercialized Thin Film cells and have built up experience in researching the sector would be most efficient. ● In the case of a-Si Thin Film cells, domestic companies have the technology to manufacture the early stages, and by forming a technology-sharing partnership with a more advanced company, the time to market could be shortened. ● In the case of compound Thin Film cells (CdTe, CIGS), the technological gap with advanced companies is fairly large. Entering this market through an M&A deal with a company that has the necessary technology and commercialization ability is recommended.